|
|
|
|
(Contact
Belinda at 800-438-8155 or 828-837-9200 for pricing.)
|
The WiNRADiO RLX-800 Network Receiver consists of a
software-defined radio receiver and a web server on a Linux-based
industrial computer platform.
No additional hardware such as a PC, keyboard or
monitor are required on the server side. The unit contains a highly
reliable, fan less Linux computer for server-side processing and storage.
The actual receivers are the well-proven
WR-G313i
(9 kHz to 30 or 180 MHz) or
WR-G315i
(9 kHz to 1.8 GHz) models. Simply plug the unit to a LAN or Internet
network via a standard RJ-45 connector, attach an antenna, and it is
ready to be used.
The web-based configuration interface makes it
possible to fully configure the communication parameters, such as the IP
address, ports, users, passwords and user access rights.
Each user can be assigned different access rights,
which may include the rights to control the receiver, retrieve saved
information, etc. |
|
|
Frequency
range from 9 kHz up to 1800 MHz
Linux-based
server for reliable unattended performance
Java-based
client applets for platform independence
Multi-user
and multiple-connection support
Encrypted
communication
Clustering
support
User
authentication
TCP/IP
or UDP protocols for streaming
Compressed
or uncompressed streaming
Audio
and IF recording and playback
Easy
configuration via web interface
Both audio and IF recording and playback are
possible. As monitoring activities take place in the server, this makes
it possible to start a monitoring task remotely and then disconnect the
client. The task then keeps running autonomously. A typical task may
include recording, spectrum sweeping or activity monitoring. The results
can be saved on the server and later downloaded for later processing and
analysis. Web-based user control makes it possible to create separate
user accounts.
Recorded files are saved on the server and can be
organized in folders.
The client-side Java applet includes a file
manager that makes it possible to organize and view recorded files.
Apart from a standard web browser, the RLX-800
Network Receiver does not require any additional application software on
the client side such as a Client Server Option; all is provided by the
built-in Java applet which runs on most common platforms. The Java
applet makes it possible to observe the signal spectrum, measure the
signal strength, tune the receiver, set the demodulation mode, control
the IF filter bandwidth and other parameters such as volume, notch or
audio filter, and listen to or record the demodulated audio. |
|
|
RLX-800 Java Applet (Client-Side user Interface) |
|
Technical Specifications
The following specifications refer to the standard
RLX-800 model. The exact types of receivers and the computer configuration
can all be customized to suit customer-specific requirements.
|
Computer |
Intel Celeron M CPU 1.5 MHz, HDD 2.5" 320 GB, 512
MB RAM, Linux OS |
|
Receiver |
WiNRADiO G313 or G315 series, frequency range from
9 kHz up to 1.8 GHz |
|
Power |
42 W (9 to 30 V DC), AC Adapter 100-240 V optional
|
|
Operating temperature |
-20 to 50 deg C |
|
Dimensions |
Length: 9.33" (237 mm)
Width 8.39" (213 mm)
Height: 4.16" (105 mm) |
|
Weight |
10.1 lb (4.6 kg) |
Specifications are subject to change
without notice due to continuous product development and improvement.
|
Ordering Code |
Description |
|
RLX-800/G313 |
Network receiver 9 kHz to 30 MHz (based on WR-G313i
receiver) |
|
RLX-800/G313/180 |
Network receiver 9 kHz to 180 MHz (based on
WR-G313i/180 receiver) |
|
RLX-800/G315 |
Network receiver 9 kHz to 1800 MHz (based on
WR-G315i receiver) |
|
RLX-800/G315/WFM |
Network receiver 9 kHz to 1800 MHz and WFM mode
(based on WR-G315i/WFM receiver) |
|
RLX-800/PSU |
100-240V AC power adapter for RLX-800 |
|
PWC-IEC-C5-AU |
Australian and Chinese power cord for RLX-800/PSU |
|
PWC-IEC-C5-EU |
European power cord for RLX-800/PSU |
|
PWC-IEC-C5-UK |
UK power cord for RLX-800/PSU |
|
PWC-IEC-C5-US |
US power cord for RLX-800/PSU |
|
|
