GRE PSR-800

Finally, a wide-frequency-coverage, hand-held scanner with just about every feature you'll need! Easy programming from its own USA/Canada database; automatic loading and tracking of all major trunking systems; P-25 digital voice decoding; database and CPU firmware updating from the Internet; computer control or stand-alone operation; spectrum sweeper to instantly receive and display nearby unprogrammed signal frequencies; S.A.M.E. weather alert; built-in recording of received frequencies; informative multi-line LCD display; standard BNC connector for external antennas; and much, much more!

FEATURES

 
Easy to understand Media Player User Interface - The simplified keypad and display with familiar Play, Pause and Navigation controls make EZ Scan Digital intuitive to use.

Complete USA Database on a MicroSD Card - The entire USA database is stored on a MicroSD Card included with the EZ Scan Digital, giving the user the most comprehensive radio data available...all without connecting EZ Scan Digital to a computer or Internet a GRE First!. 
 
Upgradeable CPU Firmware and Library - Keep EZ Scan Digital current with the enhancements and updates as they become available through provided PC Software Application

Powerful PC Software Application - Modify or add your own Scanlist with the easy to us EZ Scan Digital software application.  
 
SKYWARN Store Spotter Functionality  - Instant access to frequencies used by storm spotter networks. Monitor storm conditions as they occur, and learn about dangerous conditions before the media or emergency management officials announce them to the general public.  
 
SAME and All Hazards Weather Alerting -EZ Scan Digital features a Dedicated SAME Weather Alert Receiver mode, alerting users to severe weather and other hazards in the specific area(s) that they select. EZ Scan Digital can check local NOAA weather frequencies periodically, even while scanning, and provide an alert when an All Hazards alert occurs.  
 
Multi-System Digital and Analog Trunking - Scans digital and analog trunked radio system signaling formats, including Project-25, Motorola Type I/II/Hybrid, EDACS, and LTR systems. 
 
Powerful Spectrum Sweeper - Quickly sweeps EZ Scan Digital's frequency ranges for transmissions from nearby sources. When a nearby transmission is found, EZ Scan Digital automatically tunes to that frequency and receives the transmission.
 
Built-in Service Searches - Predefined service search ranges makes it easy to fine activity in your area.  
 
Audible alarms - Programmable alarms can be configured to sound when certain frequencies are active.  
 
Signal Strength Meter - Shows relative strength of received signals 
 
Slim, compact case design with larger speaker - Designed for one-handed operation and portability. 

Included Accessories USB Data Cable, Antenna, 2GB MicroSD Memory card, Rotating belt clip, CD-Rom Media

Recommended Accessories

AC/USB Charger (ac wall charger that adapts to USB cable)

Dual USB DC Charger  Tenergy TN323 Dual 2 port USB Car Charger (USB cable not included)

IMPORTANT! FYI

IMPORTANT! If you update the Scanner or DSP firmware, the scanner power MUST be turned off as instructed and the interconnect cable must NOT be removed. Turning the power on or removing the cable during the update will corrupt the data and temporarily disable your scanner by locking the display and processor in its "CPU SW Upgrade" mode. If this happens, follow the instructions under "Updates," then "Check for CPU Firmware Update." Failure to follow these steps properly will require a re-load of the firmware.

Details for the technically inquisitive: Flash-updating the firmware of an EEPROM chip must not be interrupted or its data stream will be corrupted and the chip can no longer function properly until the firmware is updated again. Turning on the scanner requests information from the chip which interrupts the update, as does removing the cable. Reloading the firmware as instructed can restore the proper operation of the scanner.

SPECIFICATIONS