|
WR-G526e/TM Tuner Module
|
Input frequency range |
20 - 3000 MHz |
|
Tuning resolution |
10 Hz |
|
Usable Dynamic Range |
104 dB |
|
Overall Receiver System Noise Figure |
12 dB |
|
Output frequency |
21.4 MHz |
|
Output bandwidth |
22 MHz |
|
Gain |
30 dB typ. |
|
Noise figure |
12 dB max |
|
Internal spurii |
-105 dBm typical (max 3 spurii at -85 dBm or lower) |
|
IF rejection |
>60 dB |
|
Maximum input level |
+10 dBm |
|
Attenuation control |
0-30 dB switchable front-end attenuator in 2 dB steps,
20 dB switchable attenuator in IF path |
|
IP3 |
0 dBm, +3 dBm typ. |
|
Input impedance |
50 ohm (SMA connector) for each channel |
|
Output impedance |
50 ohm (SMA connector) for each channel |
|
Amplitude ripple |
3 dB typ. |
|
Phase ripple |
3 degrees typ. |
|
Phase adjustment range |
20 degrees typ. |
|
Phase adjustment resolution |
0.1 degrees typ. |
|
Channel-to-channel isolation |
>80 dB |
|
Dimensions |
150 x 90 x 30 mm (5.9" x 3.5" x 1.2") |
|
Weight |
330 g (11.6 oz) |
|
Operating temperature |
-10º to +60º C |
|
Humidity |
20-90% non-condensing |
WR-G526e/RM Reference Oscillator and Distribution
Module
|
Total oscillator phase noise |
-90 dBc/Hz @ 10 kHz |
|
Tuning speed |
15 ms |
|
Frequency stability |
0.01 ppm |
|
Dimensions |
150 x 90 x 45 mm (5.9" x 3.5" x 1.8") |
|
Weight |
650 g (23 oz) |
|
Operating temperature |
-10º to +60º C |
|
Humidity |
20-90% non-condensing |
WR-G526e/SC Integrated Single-channel Module
|
Input frequency range |
20 - 3000 MHz |
|
Tuning resolution |
10 Hz |
|
Output frequency |
21.4 MHz |
|
Output bandwidth |
22 MHz |
|
Gain |
30 dB typ. |
|
Noise figure |
12 dB max |
|
Total LO phase noise |
-90 dBc/Hz @ 10 kHz |
|
Internal spurii |
-105 dBm typical (max 3 spurii at -85 dBm or lower) |
|
Tuning speed |
15 ms |
|
Frequency stability |
0.01 ppm |
|
IF rejection |
>60 dB |
|
Maximum input level |
+10 dBm |
|
Attenuation control |
0-30 dB switchable front-end attenuator in 2 dB steps,
20 dB switchable attenuator in IF path |
|
IP3 |
0 dBm, +3 dBm typ. |
|
Input impedance |
50 ohm (SMA connector) |
|
Output impedance |
50 ohm (SMA connector) |
|
Power consumption |
6 W typ. |
|
Dimensions |
150 x 90 x 45 mm (5.9" x 3.5" x 1.8") |
|
Weight |
650 g (23 oz) |
|
Operating temperature |
-10º to +60º C |
|
Humidity |
20-90% non-condensing |
Due to continuous product improvement, specifications
are subject to change without notice. |