Triple-conversion receiver is acclaimed for its strong-signal handling, high sensitivity, sharp selectivity, extraordinary frequency coverage (10 kHz-3000 MHz), compact size, frequency accuracy, long-term stability, and durability.
Superior quality and selectivity to 1 Hz ! Now, the legend is further 3 steps ahead with
"AFC (Automatic Frequency Control)" , "Noise Blanker" and "Synchronous AM Detector"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FEATURES
Synchronous AM Synchronous AM is a useful tool to help reduce distortion due to selective fading, in particular on the short wave bands (long & medium wave bands too). In synchronous AM, original carrier is phase locked to a stable internally generated synthetic reference which is used to replace the (variable) original carrier resulting in more stable reception with greater recovered audio, especially during deep fades. A wide lock range is provided by this detector to enable simple, quick & efficient operation (unlike some other synchronous units on the market which require extremely accurate tuning).
| SAM | Synchronous AM double side band |
|---|---|
| SAL | Synchronous AM lower side band |
| SAH | Synchronous AM upper (higher) lower side band |
AM transmissions are constructed of a carrier and both upper & lower sidebands. Usually both side bands carry the same information so both or either may be selected with the same recovered resulting audio, however when adjacent interference is present, selecting synchronous single side (SAL or SAH) can provide improved results.
Automatic Frequency Control (A.F.C.) Automatic frequency control is a
"global" facility, either OFF or ON (default is OFF). When, A.F.C. is used in
AM, FM and synchronous AM modes, the receiver is automatically tuned on to the
center frequency to provide the best signal strength and recovered audio. When
used in synchronous AM modes, AFC ensures that the signal is pulled within
lock range for no-fuss operations. AFC is particularly useful on the VHF-UHF
bands to ensure that the AR5000 is receiving spot on frequency, especially
when searching through unusual bband plans or when the exact band plan is not
known.
Noise Blanker The Noise blanker is another "global" facility, either
OFF or ON (default OFF). This facility is particularly useful to help reduce
impulse noise and interference from vehicles ignition systems, whether from
passing traffic or while the AR5000 is fitted into a mobile installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RECOMMENDED AOR ACCESSORIES
| CVR04 | AOR TV-5000 TV CONVERTER |
| ACC30 | AOR AS-5000 ANTENNA RELAY SWITCH {SPECIAL ORDER} |
| FTR01 | MF-500 500Hz COLLINS MECHANICAL FILTER {SPECIAL ORDER} |
| FTR02 | MF-2.5 2.5kHz COLLINS MECHANICAL FILTER {SPECIAL ORDER} |
| FTR03 | M-F4.0 4.0 kHz COLLINS MECHANICAL FILTER {SPECIAL ORDER} |
| FTR04 | MF-6.0 5.5 kHz COLLINS MECHANICAL AM FILTER {SPECIAL ORDER} |
| ACC96 | AOR CT-5000 CTCSS TONE SQUELCH |
| CBL05 | AOR CR-5000 TAPE RECORD CABLE {SPECIAL ORDER} |
| ANT11 | AOR DA-3000 DISCONE BASE ANTENNA |
| ANT12 | AOR MA-500 WIDE RANGE MOBILE ANTENNA |
| ANT39 | AOR SA-7000 SUPER WIDE RCV BASE ANTENNA |
| ANT44 | LA380 SW LOOP ANTENNA |
| MAN01 | AOR 5000+3 SERVICE MANUAL {SPECIAL ORDER} |
| TST10 | AOR SDU-5600 |
Optional
Accessories