|
Notes:
1. The Professional Demodulator offers
two additional demodulation modes, DSB and ISB.
2. The Wide-FM Option provides a
separate wide-FM demodulator. The wide-FM demodulation is performed in
hardware, using conventional hardware-based demodulation techniques, in
order to ease the requirement of PC processing power which would
otherwise be required for a signal of this bandwidth. In other words,
the Wide-FM Option is an entirely separate receiver on its
own right.
3. The Professional Demodulator offers
continuously adjustable IF bandwidth from 100 to 15000 Hz in all
narrow-band modes. The optional Wide-FM demodulator has a fixed
bandwidth of 230 kHz.
4. The AM sensitivity is specified at 30% modulation
for 10 dB S/N ratio. For 80% modulation, typical AM sensitivity of
WR-G305i is 0.60 µV in 0.15-500 MHz range. The Professional
Demodulator improves sensitivity further by making it possible
to extend filter lengths, and adjust the IF bandwidth for optimum
reception of the received signal: This results in a typical improvement
by 2-3 dB on AM/SSB/FM and up to 10 dB on CW.
The WR-G305e receiver is truly one of the most
sensitive receivers available, yet with an excellent dynamic range.
The following table illustrates the effect of the AM
modulation depth and the Professional Demodulator on typical sensitivity
figures:
| |
AM Sensitivity (10 MHz, 10 dB S/N) |
|
Demodulator |
30% modulation |
80% modulation |
|
Standard |
1.7 µV |
0.6 µV |
|
Professional |
1.5 µV |
0.45 µV |
Specifications are subject to change without notice
due to continuous product development and improvement.
|