VHF/UHF Antennas

The DA3200 is a rugged 16 element discone antenna and is Ideal for professional, surveillance and monitoring applications.
Ultra wideband design providing continuous coverage from 25 MHz to 3000 MHz.
Designed and manufactured to exacting standards

The DA5000 is a very high performance, commercial grade UHF Discone receive antenna.
The frequency coverage is 700 to 3000 MHz and the DA5000 equipped with a N connector.
The maximum antenna gain is 2.5 dB.

Ideal for wide-frequency-coverage receivers: 30 kHz-2 GHz reception.

Bob's Pick...
 In test after test, I've never found a compact antenna that outperforms the Condor.

The 12" Austin Condor is guaranteed to improve weak signal scanner reception--on all frequency ranges--over the original scanner antenna.

The 12" Austin Condor is guaranteed to improve weak signal scanner reception--on all frequency ranges--over the original scanner antenna. Comes with BNC right angle adaptor for desktop units.

This wideband, high~gain, directional antenna offers 10-12 dBi gain from 50~1300 MHz.

This wideband, high~gain, directional antenna offers 11~13 dBi gain from 105~1300 MHz.

Nice things come in small packages. This 48" wire antenna, suspended vertically outdoors (preferable) or indoors, provides surprising performance from 25-2500 MHz.

Bob's Pick...
 "Customers often ask if they can transmit with the Omni. Yes, with low power (10-20 watts) limited by the small-gauge windings in the balun transformer. SWR will depend upon the frequency."

For ham and commercial handie-talkies as well as hand-held scanners.

Continuous frequency coverage from 100MHz-3300MHz (3.3 GHz) is ideal for the new wide-frequency coverage receivers from ICOM, AOR, WiNRADiO, ALINCO and scanners, too! Use it for transmitting up to 200 watts on ham*, government, military, aircraft and commercial bands as well!

For improved transmit and receive on 806-960 MHz base receivers.

For improved transmit and receive on 806-960 MHz portable handheld receivers.

HIGH PERFORMANCE, LOW PROFILE, MOBILE SCANNER ANTENNA

We have replaced our popular Stealth antenna with this mechanically improved model that features a tight hold, wind resistant, chrome finish, 3.25” magnetic base built to withstand high road speeds.

Bob's Pick...
For maximum-distance, wide-frequency-coverage, low-cost scanner reception, nothing beats the Scanner beam.

Grove’s highly-regarded Scanner Beam has been improved with higher gain, and is being released at a special introductory price! Mount it high and in the clear for full-spectrum VHF/UHF frequency coverage from 30-1000 MHz! Hear law enforcement agencies, firefighters, emergency medical teams, aircraft, marine radio, trains, FM and TV broadcasting, business band, federal agencies and more—up to 100 miles away!

Bob's Pick...
SCANTENNA: This is the standard of the scanner industry for complete VHF/UHF coverage -- low cost, high performance.

This omni-directional scanner antenna will equal or outperform any competitor on the market. Its dipole-cluster design utilizes broadband techniques to provide continuous frequency coverage from 25-1300 MHz.

*Shipped only in U.S. and Canada.
Standard 2^nd day shipping rate is no longer available on this item.

This high-performance, low profile (17" H) mobile replacement antenna is guaranteed to improve multiband mobile communications over other whips! Its patented, tilted, three-element design uses harmonic patterning to improve VHF/UHF reception and transmission without retuning! Ideal for modern, 25-1300 MHz, wide-coverage scanners, and for 100 watt commercial, amateur, and government transceivers operating in the 140-174, 216-225, and 406-512 MHz ranges.

Imagine improving your VHF/UHF base station communications or scanner monitoring by substituting one low-profile (17" H), multi-element antenna system on your antenna line! Its patented, tilted, three-element design uses harmonic patterning to improve VHF/UHF reception and transmission without retuning! Ideal for modern, 25-1300 MHz, wide-coverage scanners, and for 100 watt commercial, amateur, and government transceivers operating in the 140-174 and 406-512 MHz ranges.

      For fixed installations this sturdy, yet lightweight (2.1 lbs) model includes a drooping ground plane array, making the maximum tip-to-tip antenna height 44”, flaring out at its base to a 33” diameter. The stainless steel wire elements provide a good combination of low wind load and rugged weather durability. It utilizes an NMO mount with a female N connector for the attachment of coax cable.

 MP Enterprises claims extremely wideband receive coverage--25-6000 MHz (6 GHz)! For transmitting, it can accept up to 200 watts of RF power at 50 ohms impedance from 120-512 MHz, and 100 watts from 512-6000 MHz. VSWR averages 1.6:1-1.8:1 continuously through 6000 MHz.

Maximum height is 19 inches, with the top of the cluster of elements flaring out to a 12 inch diameter. Weight (less base) is a mere 5 ounces, yet the sturdy, stainless-steel elements, firmly locked in place with set screws, provide reliable ruggedness with their low wind load at high road speeds with strong magnetic-base with cable.

            MP Enterprises claims extremely wideband receive coverage--25-6000 MHz (6 GHz)! For transmitting, it can accept up to 200 watts of RF power at 50 ohms impedance from 120-512 MHz, and 100 watts from 512-6000 MHz. VSWR averages 1.6:1-1.8:1 continuously through 6000 MHz.

Maximum height is 19 inches, with the top of the cluster of elements flaring out to a 12 inch diameter. Weight (less base) is a mere 5 ounces, yet the sturdy, stainless-steel elements, firmly locked in place with set screws, provide reliable ruggedness with their low wind load at high road speeds strong a standard NMO mount makes it a ready replacement for professional mobile whip applications.

The AX-07B is a small, rugged antenna designed for reception and low-power transmission in the VHF/UHF bands. The flexible antenna is encapsulated in a weatherproof rubber sheath resistant to chemical corrosion, abrasion, ozone, salt water and ultra violet radiation, making it ideal for outdoor applications.

The AX-37A antenna is a compact UHF directional antenna with an in-built low-noise amplifier, suitable for indoor monitoring and surveillance applications. Its small footprint, the approximate size of an A4 sheet of paper, conserves space and makes concealed installation possible, if desired. The antenna is lightweight and installation can be achieved within minutes using double-sided adhesive tape.

The AX-37AM (formerly AX-37E) antenna is a compact UHF directional log-periodic 300-3000 MHz dipole array with an in-built low-noise amplifier, suitable for indoor monitoring and surveillance applications.

Extend the range of your hand-held radio--simply attach your BNC whip and snap this rugged magnetic mount to the top of your vehicle or even an indoor metal surface (file cabinet, etc.)! Great for scanners, handy-talkies, law enforcement and commercial hand-held transceivers, government/military portables.

The AX-31C antenna is a compact VHF/UHF log-periodic directional antenna, a successor to the popular AX-31B antenna, with improved performance and reduced weight and dimensions, as well as additional packaging options: an outdoor mounting version and a hand-held one.