Shortwave/Longwave Antennas

The LA390 is a compact active (30.5cm diameter) loop antenna specifically designed to provide good reception when away from the main monitoring location or when large external antennas are not practical. Compact, but achieving high performance, featuring an internal high-gain amplifier (18dB for 150kHz-30MHz, 14dB for 30MHz-500M. Frequency range 10kHz-500MHz, 5 bands selectable

Bob's Pick...
Looking for a simple, high-performance, shortwave antenna? Hang this wire from a tree for continuous 10 kHz-50 MHz reception, and even local scanner signals.

No room for an outdoor antenna? While that's always best, try this flexible, indoor wire antenna with 10 kHz-2500 MHz reception.

Pocket Shortwave Antenna for Wideband Handheld Receivers.

Remarkably improved shortwave/longwave reception over the factory whip.

For AM broadcast band (540-1700 kHz) portables, nothing peps up a portable’s reception like an external loop antenna. Place the AN200, a low cost, 9” diameter, tunable loop alongside any radio with a built-in ferrite loop antenna and tune it for dramatically magnified reception. For direct connection to a radio’s external antenna jack, a 3” shielded lead with a stereo phone plug on one end and tinned wires on the other is provided.

Compact Active Antenna receives signals from 10 kHz through 50 MHz.

         Frequency coverage: 10 kHz-60 MHz. LF Engineering has appointed Grove to be the exclusive distributor of the enhanced-performance, H-900 Gain Probe active antenna, with additional gain for weak signal reception, and increased dynamic range to withstand strong-signal overload and avoid desensitization from close-by transmitting antennas!

The MFJ-1020C has been completely redesigned with new technology. Using a dual gate MOSFET and a gigahertz bandwidth buffer it improves gain and selectivity, reduces noise and intermod, and is not prone to self-oscillations that can severely damage your receiver. Coverage 0.3-30MHz including VLF, AM broadcast, all shortwave and amateur radio bands.

Bob's Pick...
PAR SW antenna: This is the best shortwave antenna we've ever carried -- our clients love it!

The PAR End Fedz 45-foot, commercial-quality, end-fed receiving 1-55 MHz antenna is made of virtually-indestructible Flex Weave, covered by a protective black polyethylene jacket.

Often referred to as Long Wire Balun, this device is used to match the impedance of a long wire HF antenna to a 50 ohm input impedance of a receiver. Such impedance matching usually results in a significant signal strength increase (up to 17dB in some cases, and approximately 5dB on average), compared to the long wire antenna connected directly to the antenna input of the receiver. Frequency coverage 0.1 to 30 MHz

WinRadio products are available only to customers in the U.S. and Canada.

The AX-17C Indoor Active HF Antenna is a unique low-cost small-sized antenna suitable for applications where conventional large-sized HF antennas are not possible to use, for example in apartment buildings, or for covert or mobile use. The antenna construction relies on a special type of ferrite material combined with a unique active circuit which maximizes sensitivity and minimizes overload from nearby strong signals. Frequency Coverage 0.1-30 MHz

WinRadio products are available only to customers in the U.S. and Canada.

The AX-81S antenna is a compact active HF antenna, ruggedized to suit harsh outdoor environments, and particularly suitable for marine environments. The antenna covers the frequency range of 2 to 30 MHz, or 300 kHz to 50 MHz with somewhat reduced (but still excellent) performance.

WinRadio products are available only to customers in the U.S. and Canada.