ALINCO DJX2000 TECHNICAL SPECIFICATIONS

• Detailed Frequency Coverage: 0.1- 2149.99995 MHz 
  (less 824-850, 869-895, 1432.6-1504 MHz On T Version)
  
• Intermediate frequencies (IF) (MHz): 724.4 / 304.3, 45.04, 10.7, 0.455
  
• Mode: NFM/WFM(mono,stereo)/AM/CW/USB/LSB
  
• FM modulation acceptance (NFM): 8.4 kHz
  
• Squelch tail length (1uV @ 155 MHz): 110 mS.
  
• Antenna imp.: 50 ohms
  
• Antenna terminal: BNC
  
• Supply voltage: DC 4.8V (Ni-Cd battery pack EBP-33,34,37N), DC 6V with EDH-16 AA battery case, DC 10-16V external power source.
  
• Typical operation with Alkaline AA in EDH-16: 30hours (1:4 battery saver ON)
  
• Current consumption: Scanning/manual 108 mA, loud volume 256 mA, panel light adds 38mA
  
• Low battery warning: 4.48 VDC or less (Shutdown at 3.94 VDC or less)
  
• Frequency stability: Within +/- 2.5 ppm at operating temperature range AF output: 100mW
  or more 10% THD
  
• Channel steps: Auto, 50, 100, 200, 500Hz, 1, 2, 5, 6.25, 8.33, 9, 10, 12.5, 15, 20, 25, 30, 50,
  100, 125, 150, 200, 250, 500KHz, user-programmable
  
• Memory channels: 2,000 / 50banks, 40 channels in each bank
  
• Practical scan speed: 3 channels/sec. Search speed: 29 steps/sec.
  
• Program-Scan: 20 pairs
  
• Priority watch memory: 1
  
• Dimension without projection: 57 x 150 x 27.5 mm
  
• Weight: 200g
  
• System: Triple-conv. Superheterodyne
  1st IF: 814.5MHz or 304.3MHz
  2nd IF: 45.05MHz
  3rd IF: 455KHz
  
• Typical sensitivity: FM/WFM 12dB SINAD, AM/SSB/CW 10dB S/N
  
  • AM:
    0.1 to 5.0 MHz: 1.5uV
    5.0 to 900MHz: 1.0uV
    
  • SSB/CW:
    0.1 to 5.0 MHz: 0.6uV
    5.0 to 900MHz: 0.5uV
    900MHz up: 1.0uV
    
  • NFM:
    5.0 to 900MHz: 0.5uV
    900MHz up: 2.0uV
    
  • WFM:
    5.0 to 900MHz: 2.0uV
    900MHz up: 4.0uV
    
(An indication purposes only. The actual value may vary depending on where it is measured.)