"Because software is easily copied, it is not refundable. Defective copies will be replaced at no charge."
Control one or two receivers or transceivers simultaneously and decode RTTY, CW, PSK 31, SSTV, WEFAX, SATFAX, SYNOP, time signals, and more on over100 different models, including Icom, Yaesu, Kenwood, TenTec, JRC, AOR, WinRadio 300 series, Perseus, and scanners as well!
View signals on a multiple-display spectrum analyzer with audio analyzer and oscilloscope functions.
Utilize the advanced 3D frequency and channel scanner with DSP filter/equalizer for improved signal clarity with the new FFT Extreme. Nine integrated frequency data banks and a schedule manager. An Internet satellite image download service, satellite tracking, audio cable and Bonito DB9 switchbox level converter are included.
Your computer must have 1 GHz or higher Pentium III/Celeron microprocessor, 512 MB RAM, 1280 x 1024 graphics, Windows 2000 or XP or Vista 32 bit operating system, and a bidirectional soundcard.
RadioCom 6 Full Version, RX+TRX, with RC-HAM
Now you can receive standard (unencrypted) APCO Project 25 digital signals using an ordinary analog receiver that has a 10.7 MHz IF output. The ARD25 processes the 10.7 MHz signal, converts the digital transmission and sends it to the internal speaker, or your station speaker. Simply connect the ARD25 and begin listening to APCO 25 digital signals your analog receiver could not previously process.
The ARL2300 Ethernet Controller is an option for the AR2300 and AR5001D communication receivers, which allows remote control and remote listening through the network. It can be used for various professional or law enforcement related applications which demand interception of radio communications or radio wave monitoring from a remote location. The client software is based on the Java 2 platform and requires version 1.6 (Java SE 6 runtime) or higher to be installed on the PC on which it is running. The settings of ARL2300 can be easily changed through the local network (DHCP mode) by using a browser, based on Apple’s “Zero configuration” software Bonjour.
The ARL2300 Ethernet Controller is an option for the AR2300 and AR5001D communication receivers, which allows remote control and remote listening through the network. It can be used for various professional or law enforcement related applications which demand interception of radio communications or radio wave monitoring from a remote location.
The client software is based on the Java 2 platform and requires version 1.6 (Java SE 6 runtime) or higher to be installed on the PC on which it is running.
The settings of ARL2300 can be easily changed through the local network (DHCP mode) by using a browser, based on Apple’s “Zero configuration” software Bonjour.
Advanced IQ-5001 Software Allows High Speed I/Q Recording Up to 1MHz Bandwidth!
Enables monitoring of APCO25 digital format signals. For use with the AOR AR-2300 / AOR AR5001D
Provides APCO P25 digital mode reception 10/24/06-12/31/06 Free UT-122, P25 Module with purchase of IC R-2500 OR PCR-2500 receiver
RadioCom 4.52PRC, for ICOM R/PCR1500/2500 only
This single-receiver version has nearly the same decoding functions as the 6.0, providing control for over 100 radio models. An Internet satellite image download service and a Bonito DB9 switchbox level converter are included. An Icom PCR/R-1500/2500 edition is available on special order. Your computer must have a 450 MHz or higher Pentium III/Celeron microprocessor, 128 MB RAM, 16 color 800 x 600 pixel resolution graphics card, Windows 2000 or XP or Vista 32 bit operating system, and a bidirectional soundcard. And you can upgrade the RadioCom 4.52 later to the RadioCom 6!
RadioCom 4.52UNI, RX only, with RC-HAM
W-61PC card has W-61 software and now also includes W-SAT and W-PACKAGE. The W-61PC card has a tunable 70 MHz input to accommodate a down-converted INMARSAT bandwidth. For new installations, order instead the W-PCI (for normal towers) or W-PCIe (smaller edge-card connector for compact computers, available September/October 2011).
This Classifier and Code Check (CCC) software option will analyze the modulation type, baud rate, frequency shift, and bandwidth of unknown signals when used with professional WAVECOM decoders
The WAVECOM® BitView Tool (W-BV) is an excellent companion to the WAVECOM® decoder products. It is a standalone application for analyzing unknown signal; signals with unknown protocols can be further analyzed and processed to retrieve the transmitted data. The software can also be used as a post processor for decoded data.
W-CODE V8.2.00 -- now with W-CLOUD!
Decode signals over the entire HF band plus INMARSAT, and now include Chinese 4+4, classifier narrowband extension to 48 kHz for VHF/UHF satellites, and improved ACARS decoding.
W-CLOUD is a networked decoding, TCP/IP application which enables uninterrupted and encrypted transfer of I/Q data from a remote WAVECOM decoder to a central W-CODE site for final processing. W-CLOUD enables data decoding, signal classification, and monitoring over a large geographical distance using your Internet access.
The automation of the signal classification process relieves the operator from manual evaluation, which otherwise requires considerable skill and experience. The combination of a classifier and a decoder thus satisfies the requirement for an automatic system that is able to rapidly and reliably determine the characteristics of radio data transmissions within the signal spectrum being monitored.
The ability to rapidly identify unknown signals has become an essential requirement in signal analysis. The automation of the signal classification process relieves the operator from manual evaluation, which otherwise requires considerable skill and experience. The combination of a classifier and a decoder thus satisfies the requirement for an automatic system that is able to rapidly and reliably determine the characteristics of radio data transmissions within the signal spectrum being monitored.
The ability to rapidly identify unknown signals has become an essential requirement in signal analysis.
W-PCI card now include W-SAT and W-PACKAGE. The card has 2 channels with 3 inputs at 70 MHz IF, and 2 inputs at 50 Hz – 25 MHz AF/IF. These inputs allow HF/VHF/UHF monitoring using the AF/IF input (superior to a sound card), and INMARSAT monitoring which has been down-converted to a 70 MHz IF output. The card provides A/D conversion, digital down conversion (DDC), decimation, and filtering
The W-PCI-LAN decoder offers all the functions of the W-PCI hardware and W-CODE software decoder plus all the advantages of a compact computer system.
The device is implemented in a ruggedized aluminum box. It can be connected to a PC or notebook via LAN or may operate as a stand-alone system. As the W-PCI-LAN operates from 9-30 V DC power sources, it is very well suited for mobile use.
W-PCI-LAN offers two completely independent DDC (Digital Down Converter) inputs at AF and IF level. The DDCs extract the narrowband signal of interest from a broadband input signal. Each input has its own independent bandwidth and center frequency control.
W-PCIe card now also includes W-SAT and W-PACKAGE. The card has 2 channels with 3 inputs at 70 MHz IF, and 2 inputs at 50 Hz – 25 MHz AF/IF. The inputs allow HF/VHF/UHF monitoring using the AF/IF input (superior to a sound card), and INMARSAT monitoring which has been down-converted to a 70 MHz IF output. The card provides A/D conversion, digital down conversion (DDC), decimation, and filtering.
Standalone application which can decode data streams acquired from a wide range of different satellite reception equipment, including the WAVECOM-INMARSAT decoders. Email text and attachments (pictures, PDF files, spreadsheets, etc.) can be extracted from the data streams and saved.
A small PC containing the W61 card and software. It can be used stand-alone or addressed over a network for access by multiple computers.
The WiNRADiO Universal FSK Decoder is an extremely versatile signal decoding utility suitable for 1000, 1500 and 3000 Series of WiNRADiO receivers. The Decoder contains several powerful analysis tools, making it possible to determine transmission characteristics of an unknown signal automatically.
WinRadio products are available only to customers in the U.S. and Canada.
go2ANALYSE is a bit stream analysis software for manual determination of code characteristics and a user friendly and yet most powerful tool for analysis of any existing bit streams.
go2DECODE is a standalone software for signal recognition, demodulation, decoding, speech detection, signal recording and technical signal analysis.
The software is designed for applications in civilian and military environments at government agencies, defense signal corps, homeland security agencies and telecommunication authorities
go2MONITOR is a modular software solution for receiver control, classification, demodulation, decoding and recording of HF, VHF, UHF signal.
New threats demand superior information, acquired and analyzed from all potential sources. The increasing density of cryptic signals produced by new or modified modems demands the use of sophisticated demodulation and decoding systems.
Monitoring and digital recording of wideband signal scenarios is a precondition for the exact measurement of radio emissions and frequency assignments. It is commonly used in radio reconnaissance and frequency monitoring (ITU).
