|
BC340CRS scanner is a multi-featured conventional channel
scanner.
You can easily enter and store frequencies for police, fire/emergency, marine,
air, amateur,
and other radio services into 100 channels distributed over ten banks.
The scanner also lets you listen to NOAA (National Oceanic and Atmospheric
Administration)
weather broadcasts for valuable information specific to your location.
Features:
Channel Memory Scanning — Scans
frequencies you have stored in any of the channels or banks at a rate of up to
60 channels per second.
Memory Availability — Store and then scan any of up to 100
channels distributed over 10 banks.
Direct Channel Access — Press 0
− 9 and HOLD
to directly access any stored frequency.
Channel Lockout/Frequency Lockout — Skip over stored
frequencies (channels) using the Lockout feature to enable faster scanning. Lets
you
designate up to 50 frequencies to skip during a search (limit or service) to
increase the scanning speed.
Alarm Clock with Snooze — provides standard radio broadcasts
that you can set as your alarm sound.
AM/FM and TV 2-13 Broadcast — lets you store up to 30 preset
broadcast channels (10 AM and 20 FM/TV) for quick access.
Priority Channel — Designate a specific frequency as a
Priority Channel. Then the radio scans and checks that channel every 2 seconds.
Select and designate up to 10 frequencies as Priority Channels (one per bank).
Duplicate Channel Alert — Lets you know that a selected
frequency has already been programmed into memory if you attempt to store it
again.
Limit Frequency Searching — Lets you designate lower and
upper frequency range and search within that range for active frequencies. You
can then store frequencies in memory as channels for later recall.
Service Search — Lets you designate one of the five
preprogrammed service channels (Police, Fire/EMS, Air, Ham, Marine) to search.
Weather (WX) Scan — Scan the preprogrammed weather channels.
Scan and Search Speed
• Scan Speed 60 channels per second maximum in SCAN MODE.
• Search Speed 60 steps per second maximum in SEARCH MODE.
• TURBO MODE For frequency steps 5kHz apart, searching occurs in
Turbo Mode which is 180 steps per second.
Clock Display — the scanner, in
standby mode, displays the time. The clock also features an alarm that can sound
up to 20 minutes or be shut off manually.
A convenient snooze button lets you silence the alarm for an extra 5-minutes.
Delay — you can enable or disable the 2-second delay to
resume scanning when a transmission ends. Enabling this feature helps prevent
missing a response from one of the parties in the transmission.
LCD Backlight — you can enable or disable the LCD back
lighted display.
Key Touch Tone — a tone sounds to confirm you have made a
valid key input while a different tone sounds to alert you to an invalid entry.
EEPROM Memory Backup — the scanner uses a non-volatile
EEPROM for memory backup.
Battery Alert — A battery icon alerts you to a no battery
installed condition, and a battery low voltage condition. An alert tone sounds
when
the battery needs to be replaced. The backup provides backup for the clock when
power is off and will power scanning for a short time.
Auto Power Off — turns the scanner off when the battery
power gets too low.
BC340CRS Manual PDF
Technical Specifications
Band Coverage : 16 Bands
Channels : 100 (10 channels
× 10 Banks)
Scan Rate : Up to 60 channels per second
Search Rate : Up to 60 steps per second
Time Accuracy : +/ −
20 seconds per month at normal temperature (25°C
± 5°C)
Audio Output (normal) : 0.9W Max
Power Requirements : 120V AC (±10%) 60Hz
Antenna : Telescoping (included), AM Radio Loop (included)
External Jacks : Antenna jack; AM Radio Antenna Jack; Headphone
Jack; DC 12V Power Jack
Accessories : AC Adapter (AD-1008)
Speaker : 8 ohm, 2 watt
Size : 209(W) ×
147.75(D) ×
80.7(H) mm
Weight : 1 lb.6 oz (without antenna)
Features, specification, and availability of optional
accessories are all subject to change without notice.
|
