When connected to the AR2300/AR5001D communication receiver, the GP5001 GPS receiver increases the frequency stability from +/- 1ppm to +/- 0.01ppm, by using the GPS pulse signal for an accurate time base of the local oscillator circuit. +/- 0.01ppm frequency stability of the 10MHz internal master oscillator is achieved when synchronized to a GPS signal.
The GP5001 GPS receiver system differs from typical “map based” positional systems. It feeds a highly accurate one-pulse-per-second (PPS) signal to the AR2300/AR5001D receiver. The rising edge of the signal is aligned to the start of each GPS second within 1μsec.
GP5001 is composed of an OEM GPS receiver (the round case element) made by GARMIN (U.S.A), to which we have added a DC-DC converter (the tube shaped case).
Specifications:
System: Simultaneous reception of up to twelve GPS
Power requirements: DC 12V, 50
Cable length: Approx.5 meters
Weight: 200g
１
Water resistance: GPS receiver (round case element): Waterproof to IPX7 level (immersion in 1m of water for 30 minutes) DC-DC converter (tube shaped case): Not water resistant
Caution!
The GPS receiver (round case element) contains a strong magnet. Do therefore not approach it to devices sensible to magnetic fields such as floppy disks, hard disks, cellular phones, cathode ray tubes, clocks or credit cards.AOR Ltd. cannot be held responsible of any device damage or data loss resulting of incorrect use of GP5001.
