|
Frequency Range
The SM5010 spectrum analyzer is indispensable for viewing
an entire block of radio spectrum, revealing unknown signals. Choose small
segments under 1 MHz wide, or step sequentially up to a giant swath of more than
1 GHz , observing all signals in the spectrum.
Connect the SM5010 to an antenna to analyze radio systems,
detect radio frequency interference, search for unknown signals, and determine
spectrum use in your area. Plug in earphones or a speaker to monitor signal
contents. Connect a test probe to track and measure signal distribution in
transmitters, receivers, computers, and other analog and digital instruments.
Technical Specifications
Frequency Range: 0.15 to 1050 MHz
Center Frequency Display Accuracy: ±100kHz
Marker Accuracy: 0.1% span + 100kHz
Resolution of Frequency Display: 100kHz (4.5 digit LED)
Frequency Scan width Accuracy: ±10%
Frequency Stability: Better than 150kHz/ hour
IF Bandwidth (-3dB): 400kHz and 20kHz
Video-Filter when selected: 4kHz
Sweep Rate: 43 Hz
Amplitude Range: -100dBm to + 13dBm
Screen Display Range: 80dB (10dB/div.)
Reference Level: -27dBm to + 13dBm (in 10dB steps)
Reference Level Accuracy: ±2dB
Average Noise Level: -90dBm (20 kHz bandwidth)
Distortion: < -55dBc of 2nd and 3rd harmonic
Third Order Intermodulation: -70dBc (two signals > 3MHz
apart)
Sensitivity: Better then -90dBm
Log Scale Fidelity: ±2dB (without attenuation) @ 500MHz
Input Attenuator: 0 to 40dB (Four 10dB steps)
Input Attenuator Accuracy: ±1dB/10dB
Max. Input Level: +10dBm, ±25V DC (0dB attn) +20dBm (40dB
attn.)
Span (Scan Width): 100kHz/div. to 100MHz/div in 1-2-5
steps; and 0Hz/div.
|
