Stridsberg MCA204M VHF/UHF Receiver Multicoupler

$184.95
CPL3

MCA204M VHF

VHF/UHF Frequency Range

25 MHz Input High-Pass Filter

P1dB = 17 dBm IP3 = 31 dBm

No Signal Loss to Output Ports

Rugged Cast Aluminum Case

NOW WITH!! Improved Dynamic Range, Front-end protected against transient pulses and nearby transmitter burn out.

Description

The MCA204M is a specially designed multicoupler for use in the VHF/UHF service band for radio monitoring and signal surveillance.
Its high performance and rugged design will meet the most stringent commercial and government requirements.

MCA204M can support up to four (4) devices such as radios or spectrum analyzers. The four outputs has a gain of +4 dB with a nominal impedance of 50 Ohm. The input circuitry features a 5-section high-pass filter to shape the frequency response of the unit and to provide for out-of-band signal rejection.

The MCA204M is constructed in a rugged die cast aluminum enclosure with mounting flanges. Light gray baked enamel coating is standard with satin black (Mil) and olive drab (green/Mil) available on QTY 5 and up.

A wall adapter (110 VAC/+12 VDC-300 mA) is supplied for the North American market.
Optional EMI/RFI filtered DC feed thru for hard wiring is also available.

Specifications
Frequency Range:	25 MHz to 1 GHz
Isolation:	> 22 dB (port-to-port)
Gain/Loss:	+4 dB, +/- 1.5 dB (nom) (Unused ports terminated)
P1dB:	+17 dBm
IP3:	+31 dBm
Input Filter:	25 MHz High-Pass
Noise Figure:	3.5 dB (nominal/50 Ohm terminated)
RF Connectors:	BNC
DC Connection:	5.5mm/2.1mm (coaxial)
DC Power:	+12 {+10 to +20VDC} VDC at 100 mA; 120VAC Wall adaptor included
Enclosure:	Die Cast Aluminum
EMI/RFI Shielding:	75 dB min. at 870 MHz
Size:	5.5 x 2.25 x 1.25 Inches (excluding connectors)

	This Data Sheet is designed to print from the browser on a 8-1/2 by 11 inch paper size