Stridsberg MCA108M Active Multicoupler, 100kHz-50MHz, 8 Ports

CPL2

 

$334.95

500 kHz to 50 MHz 8 Ports

LF/HF Frequency Range

50 MHz Input Low-Pass Filter

P1dB = 17 dBm IP3 = 31 dBm

No Signal Loss to Output Ports

Rugged Cast Aluminum Case


Description

The MCA108M is a specially designed multicoupler for use in the HF band, 500 kHz to 50 MHz, for radio monitoring and signal surveillance.
Its high performance and rugged design will meet the most stringent commercial and government requirements.

MCA108M can support up to eight (8) devices such as radios or spectrum analyzers. The eight outputs has a gain of +4 dB with a nominal impedance of 50 Ohm. Input circuitry features a 5-section 50 MHz low-pass filter to shape the frequency response of the unit and to provide for out-of-band signal rejection.

The MCA108 is constructed in a rugged die cast aluminum enclosure with mounting flanges. Satin Black baked enamel coating is standard withLight Gray (Mil) and Olive Drab (green/Mil) available on QTY 5 and up.

DC power required is +12 Volts (nominal) at 100 mA.
A wall adapter (110 VAC/+12 VDC-300 mA) is supplied for the North American market.
Optional EMI/RFI filtered DC feed thru for hard wiring is also available.

Specifications
Frequency Range: 500 kHz to 50 MHz
Isolation: > 22 dB (port-to-port)
Gain/Loss: +4 dB, +/- 1.5 dB (nom) (unused ports terminated)
P1dB: +17 dBm
IP3: +31 dBm
Input Filter: 50 MHz Low-Pass
Noise Figure: 3.5 dB (nominal/50 Ohm terminated)
RF Connectors: BNC
DC Connection: 5.5mm/2.1mm (coaxial)
DC Power: +12 VDC at 100 mA
Enclosure: Die Cast Aluminum
EMI/RFI Sheilding: 55 dB @ 50 MHz
Size: 5.75 x 3.75 x 1.25 Inches
(excluding connectors)
Options 1. RFI/EMI Ceramic DC Feed Thru.
2. PCB conformal coating for high humidity installations.

This Data Sheet is designed
to print from the browser on
a 8-1/2 by 11 inch paper size