AOR IQ-5001 I/Q Interface w/Control Software

AOR has brought a new level of receiver control to the AR-5001D & AR2300 with the addition of IQ-5001 software.

This free software enables the AR-5001D & AR2300 to store and playback a full 1MHz of bandwidth activity without any loss of quality.
Raw data can be easily transferred from the AR-5001D & AR2300 to the hard drive of almost any computer*** for later analysis and review.
It is even possible to listen to a frequency off-line by recording data and storing it on a PC. Operators can also create loops to cover
a particular time frame so that no signal is missed. Signal bursts are easily seen with the full color waterfall display function.

Using the control panel of the AR-5001D & AR2300 through a PC monitor, operators are able to enjoy added capabilities.
You can perform unattended data logging for extended periods of time depending on storage capacity.
So, for hours, days or even weeks, you can capture up to 1MHz bandwidth 25MHz and up for later playback and analysis.
You can even listen repeatedly to a loop in time to decode a transmission received in difficult conditions.
IQ-5000 software can be uploaded to multiple PCs so that you can transfer data from a PC connected to the AR-5001D & AR2300 over to another

PC for playback and review.

■ Up to 1MHz bandwidth can be recorded for later evaluation

■ High recovered audio quality with no deterioration of recorded data

■ Can be used to perform unattended data logging

■ Spectrum display, full color waterfall and averaging functions support signal evaluation and analysis

■ Easy to use. No training required

The AR-IQ is an optional accessory for the AR2300 and AR5001D. 
Supplied with an I/Q interface board to be plugged into each receiver, the control software,
and 2 USB interface cables. No other hardware/software is needed to use I/Q function.