
Uniden’s new BCT15 base/mobile scanner presents an enormous
feature list: Wide 25-512, 764-956 and 1240-1300 MHz reception; 2500 memory
channels with selective lockout for up to 500 systems, plus state-by-state
preprogrammed public safety channels; simultaneous trunking and conventional
scanning; simultaneous scan and search; Service Search of
factory-pre-programmed public safety, news, weather, ham radio, marine,
railroad, military and civilian aircraft, CB, FRS, GMRS, racing, TV and FM
broadcasting, and special; 16 character alphanumeric display; searches up to 10
ranges in order; scan up to 100 channels per second and search up to 300;
automatically tracks all major trunking systems (Motorola Type 1 and 2, EDACS,
SCAT and LTR); PC control and cloning capability; CTCSS and DCS squelch tone
decoder; priority scan and selectable delay; Close Call instantly captures any
nearby transmission within its frequency range and can ignore pager,
broadcasting and weather channels; two-tone fire page response; automatic
memory store of search-discovered frequencies; selectable alert for emergency,
Close Call, tone-out, weather, and individual channels; alert-tone volume
adjustment; audio AGC balances audio levels from different signals; connect
your GPS for location-based scanning and searching—and those are just for
starters!
Feature Highlights
Frequency Coverage: 25-512, 764-805, 806-956, and 1240-1300 MHz
(excluding cellular frequencies)
2500 Dynamically Allocated Channels in Up To 500 Systems
BearTracker™ Warning System; State-by-State Preprogrammed Channels
Close Call™ RF Capture Technology ; Close Call Do Not Disturb; Close Call Temporary Store
PC Control
Trunk Tracker III — you can scan the following trunked systems: Motorola Type I
800 MHz, Motorola Type II 800, 900 MHz, UHF, VHF, EDACS WIDE, NARROW, and
SCAT, and LTR Control Channel Only
Multi-Site Trunking Support.
CTCSS/DCS Search
Weather and SAME/FIPS Alert; WX Priority; WX Scan
Accessories Included: AC Adapter (P/N AD-1009); Cigarette Lighter Adapter Power Cord; Three Wire DC; Power Cord; Mounting Bracket and Hardware; Push-on type Telescopic Antenna; Remote PC to Scanner Cable (scanner plug to female DB9); Owner’s Manual
Power Related Issues Important: To prevent memory from being corrupted, do not unplug the AC adapter during the time the memory is accessed for programming or auto store. Notes: • If when you connect the AC adapter the [VOL] /Power Switch is ON, the scanner may not power on. Should this occur, simply turn the control OFF, then ON again. • If the scanner loses power (as when you turn off your car’s ignition with the scanner’s power switch on), it can lose some system settings such as display color and backlight. To ensure that such settings persist, either change the setting using the scanner’s menu or power the scanner off then back on using the power switch after making such setting changes. • When you turn off the scanner using the power switch, the scanner remembers the last settings and mode. When you turn power back on, it resumes the previous mode.
Recommended Uniden BCT-15 Accessories
CBL14
Uniden USB-1 USB Cable
Optional Accessories