The sealed antenna probe consists of impedance matching electronics and amplifier which transform its internal short length wire antenna into a 100 foot "long wire" equivalent. The H-800 has very high E field sensitivity with the advantage of good BC intermodulation rejection. The H-800 is compact and totally sealed (no whip) providing the advantage of reduced EMI interference.
The antenna is omni-directional allowing for various installation configurations and for use as a portable antenna. The H-800 probe is waterproof and UV resistant.
Includes integrated active antenna, 50 feet of RG174U w/ RCA coax lead-in, control box, 36" jumper with RCA plug; {adaptors to fit your receiver listed below} and AC adaptor.
Due to high amplification, not recommended for shortwave portables which tend to overload easily.
FEATURES
* 10kHz-50MHz broadband coverage (no tuner required).
* 50 ft of RG174U with RCA connector included.
* The antenna probe is fully sealed and does not use a whip antenna.
* Extended ESD and RF protection.
* Mounting clamp included.
*Low power consumption, 10 ma typical.
*Dual source power design: Internal 9 volt battery (x2) or external 120 vac/12 vdc supply included.
SPECIFICATIONS
Antenna Probe Size: 26" length, 1" diameter
Coupler Size: 4.19" L x 2.74" W x 1.57" H
Operating Frequency: 10 kHz to 50 MHz +3dB
Internal (E probe) Amp. Gain: Power Gain 30dB (1MHz)
Input/Output Jacks: RCA
Weatherproofing: Antenna probe tested to -2 atmospheres (-66ft)
DC Power: 12-18 Volt, 10 ma, NEDA (2) or equivalent battery
AC Power: (included) 120 vac/12 VDC power pack with 2.5 mm plug.
OPTIONAL ADAPTORS
ADP32 RCA-PL-259
ADP25 RCA-3.5mm
ADP01 RCA-BNC
Male
Manufacturer: LF Engineering