Uniden BCD996XT
$499.95
SCN21
New Page 1
Channels: 25,000 maximum
Systems: 500 maximum
Groups per system: 20 maximum
Talkgroups per trunked system: 500 maximum
Channels per conventional system: 1000 maximum
Scan Rate: 100 channels per second (conventional mode)
Search Rate: 300 steps per second (on 5 kHz steps)
System Quick Key range: 0-99
Group Quick Key range: 0-9
Custom Search Ranges: 10
Startup Keys: 10
System Number Tagging: 999
Channel Number Tagging: 999
Preprogrammed Service Search Bands: 12
Band Scope Span Range: 0.2 MHz To 500 MHz
Band Scope Step: 5 kHz To 100 kHz
Frequency Coverage
- 25.0000 - 512.0000 MHz
- 758.0000 - 823.9875 MHz
- 849.0125 - 868.9875 MHz
- 894.0125 - 960.0000 MHz
- 1240.0000 - 1300.0000 MHz
Features
- TrunkTracker IV with Control-Channel Only scanning and I-Call monitoring:
Tracks voice traffic on P25, Motorola, EDACS, and LTR Trunked systems
- Supports scanning of Rebanded systems
- APCO25 Digital Audio decoding
- Support for P25 Conventional channels that include NAC and TGID
user differentiation (P25 One-Frequency Trunk)
- Adaptive Digital Threshold - Automatically sets the digital decode
threshold for APCO 25 systems
- EDACS ESK support
- Control Channel Data Output - allows the analysis of control
channel data without the need to perform invasive modifications to the scanner
- Close Call RF Capture
- Close Call Temporary Store (last 10 hits)
- GPS Support for location-based scanning, location alerts, and crows-flight
navigation*
- Independent GPS Control of Sites and Channel Groups*
- Supported step sizes: 5, 6.25, 7.5, 8.33, 10, 12.5,15, 20, 25, 50 or 100
kHz
- Fire Tone Out Alert
- Fire Tone Out Search - built-in frequency counter displays the
received tones.
- Band Scope - gives a graphic representation of signal activity.
- Multi-color display backlight
- Multi-Site support
- DCS/CTCSS Rapid Decode
- NAC decoding
- Ability to flag a channel as Digital, Analog, or All
- Temporary Lockout
- 10 Startup Configurations
- System / Channel Number Tagging - provides rapid access to a
specific system or channel.
- Scan and (selected) Service Search simultaneously
- Frequency/ID <nop>AutoStore - automatically store frequencies from a
service or limit search into a conventional system or store talk group IDs
into a trunked system
- 16 character text tagging for each system, group, channel, talkgroup,
search range, and SAME group
- Compatible with BC-RH96 Remote Head
- Analog and Digital AGC
- Quick Search
- Individual channel volume offset
- Intermediate Frequency Exchange - changes the IF used for a
selected frequency to help avoid image and other mixer-product interference on
a frequency.
- Key Safe Mode - lets you hand the scanner to a novice user and
prevent programming from being modified.
- Private Systems - lets you flag a system so that it cannot be read
out of the scanner or modified.
- 12 Service Searches - Public Safety, News, HAM Radio, Marine, Railroad,
Air, CB Radio, FRS/GMRS, Racing, Military Air, FM Broadcast, and Special
(Itinerant)
- Custom Search - lets you program up to 10 search ranges
- SAME Weather Alert
- Weather Priority
- Priority Scan with Priority Plus
- Priority ID Scan on trunked systems
- Preemptive Priority on Motorola analog systems
- Quick-Access Search Keys
- Negative Channel dropout delay (forced resume)
- Signal Strength display
- LCD and Keypad Backlight
- Adjustable scan delay
- Adjustable Hold (0-255 sec) per system, custom or service search
- Strong signal attenuation
- Upgradeable firmware
- Channel Alert (both tones and backlight color)
- Independent Alert Tone Volume - lets you set the volume level of the
following tones: Key Beep, Emergency Alert, Channel Alert, and Close Call
Alert.
- Repeater Reverse
- Broadcast signal ignore while searching (TV and radio station frequencies,
pagers, etc)
- Duplicate Channel Alert
- PC Programming and Control
- Wired Cloning
- Record Output
- Automatic backlight level detection (when used with the "Orange" wire
connected to a headlight switched power lead)
- DIN / ISO In-Dash Mounting with included DIN-E sleeve.
